directions

The Small Business Center is located in Room 141 in the North Building on the main campus of Sampson Community College.

Below are driving directions to the Center and a campus map available for download. If you have any questions or need assistance, feel free to contact us at 910-592-7176 or 910-592-8081.

Campus Map

From Goldsboro (Approximate driving time: 0 hrs., 45 minutes)

From Raleigh (Approximate driving time: 1 hr., 15 minutes)

From Wilmington (Approximate driving time: 1 hr., 0 minutes)

From Fayetteville (Approximate driving time: 1 hr., 0 minutes)

From Goldsboro: (Approximate driving time: 0 hrs., 45 min.) 1. Take US 70 West to US 117 in Goldsboro. Then continue on US 117 from Goldsboro toward Faison. When US 117 reaches the I-40 overpass, continue straight. US 117 will turn into Hwy 403. 2. Take Hwy 403 (2-lane road) for about 10-15 miles until you reach Clinton. When you reach a stop light, you will be at the intersection of Hwy 403 and US 701 Business. A Burger King will be on the opposite side of the street. 3. Continue straight. You will now be on College St. and will come into downtown. At the third stoplight you will be in downtown at the circle. Go through the stoplight and you go through a very short city block. 4. Take a left at the next stoplight after the short block. When you turn left, the courthouse will be on your left and you will approach another stoplight. Take a right hand turn at that stoplight to take you out of the downtown area. 5. Continue straight. You will be on Fayetteville St. and will pass a First Citizens Bank and a Centura. After passing Centura, stay on the main road. Fayetteville Street will turn into Sunset Avenue at a curve. Take the curve to the left to stay on the main road. You will pass Sampson Middle School on your left. 6. Continue straight. Go under the Faircloth Freeway and continue straight for about 2 miles. You will pass Sampson Crossings Shopping Center (Wal-Mart is located in here) and Go Toyota/Chevrolet. As soon as you pass Go Toyota/Chevrolet, Sampson Community College will be on your left. 7. Turn left at the stoplight in front of the campus. The first building you see (facing the highway) is the North Building.
1. Take US 70 West to US 117 in Goldsboro. Then continue on US 117 from Goldsboro toward Faison. When US 117 reaches the I-40 overpass, continue straight. US 117 will turn into Hwy 403.
2. Take Hwy 403 (2-lane road) for about 10-15 miles until you reach Clinton. When you reach a stop light, you will be at the intersection of Hwy 403 and US 701 Business. A Burger King will be on the opposite side of the street.
3. Continue straight. You will now be on College St. and will come into downtown. At the third stoplight you will be in downtown at the circle. Go through the stoplight and you go through a very short city block.
4. Take a left at the next stoplight after the short block. When you turn left, the courthouse will be on your left and you will approach another stoplight. Take a right hand turn at that stoplight to take you out of the downtown area.
5. Continue straight. You will be on Fayetteville St. and will pass a First Citizens Bank and a Centura. After passing Centura, stay on the main road. Fayetteville Street will turn into Sunset Avenue at a curve. Take the curve to the left to stay on the main road. You will pass Sampson Middle School on your left.

6. Continue straight. Go under the Faircloth Freeway and continue straight for about 2 miles. You will pass Sampson Crossings Shopping Center (Wal-Mart is located in here) and Go Toyota/Chevrolet. As soon as you pass Go Toyota/Chevrolet, Sampson Community College will be on your left.



From Raleigh: (Approximate driving time: 1 hr., 15 min.) 1. Take I-40 East out of Raleigh and proceed through Johnston County, over I-95, and to Sampson County pass the Newton Grove exit. 2. Take the second exit off of I-40 after you pass the Sampson County line. It is the Clinton/US 701 exit (Exit 343). At the stop sign at the top of the exit ramp, take a right toward Clinton. 3. Go approximately 15-17 miles or so and you will see US 701 split into US 701 Business and US 701 South/Bypass/US 421. The US 701 Bypass/US 421 will veer to the right. Take the bypass onto US 701 South/US 421 and go about 2-3 miles. 4. After you turned onto the bypass, turn off on the second exit (Hwy 24/Roseboro/Fayetteville exit). A BP station will be at the bottom of the exit ramp on your right. At the stop sign at the bottom of the ramp, take a right onto Hwy 24 West. 5. Go about 2 miles on Hwy 24 West. You will pass Sampson Crossings Shopping Center (Wal-Mart is located in here), followed by the GO Toyota/Chevrolet dealership. Sampson Community College is located on the left after you pass GO Toyota/Chevrolet. 6. Turn left at the stoplight in front of the campus. The first building you see (facing the highway) is the North Building.
1. Take I-40 East out of Raleigh and proceed through Johnston County, over I-95, and to Sampson County pass the Newton Grove exit.
2. Take the second exit off of I-40 after you pass the Sampson County line. It is the Clinton/US 701 exit (Exit 343). At the stop sign at the top of the exit ramp, take a right toward Clinton.
3. Go approximately 15-17 miles or so and you will see US 701 split into US 701 Business and US 701 South/Bypass/US 421. The US 701 Bypass/US 421 will veer to the right. Take the bypass onto US 701 South/US 421 and go about 2-3 miles.
4. After you turned onto the bypass, turn off on the second exit (Hwy 24/Roseboro/Fayetteville exit). A BP station will be at the bottom of the exit ramp on your right. At the stop sign at the bottom of the ramp, take a right onto Hwy 24 West.
5. Go about 2 miles on Hwy 24 West. You will pass Sampson Crossings Shopping Center (Wal-Mart is located in here), followed by the GO Toyota/Chevrolet dealership. Sampson Community College is located on the left after you pass GO Toyota/Chevrolet.
6. Turn left at the stoplight in front of the campus. The first building you see (facing the highway) is the North Building.


From Wilmington: (Approximate driving time: 1 hr., 0 min.) 1. From Downtown Wilmington (at the battleship), take US 421 North to Clinton. Take the Hwy 24 West Exit. At the bottom of the exit ramp, turn left at the stoplight. 2. Go about 2 miles on Hwy 24 West. You will pass Sampson Crossings Shopping Center (Wal-Mart is located here), followed by the GO Toyota/Chevrolet dealership. Sampson Community College is located on the left after you pass GO Toyota/Chevrolet. 3. Turn left at the stoplight in front of the campus. The first building you see (facing the highway) is the North Building.
1. From Downtown Wilmington (at the battleship), take US 421 North to Clinton. Take the Hwy 24 West Exit. At the bottom of the exit ramp, turn left at the stoplight.
2. Go about 2 miles on Hwy 24 West. You will pass Sampson Crossings Shopping Center (Wal-Mart is located here), followed by the GO Toyota/Chevrolet dealership. Sampson Community College is located on the left after you pass GO Toyota/Chevrolet.
3. Turn left at the stoplight in front of the campus. The first building you see (facing the highway) is the North Building.


From Fayetteville: (Approximate driving time: 1 hr., 0 min.) 1. From Bragg Blvd., take Hwy. 24 West to Clinton. 2. After you pass the city limits for Clinton, Sampson Community College will be located on your right. Turn right at the stoplight in front of the campus. The first building you see (facing the highway) is the North Building.
1. From Bragg Blvd., take Hwy. 24 West to Clinton.
2. After you pass the city limits for Clinton, Sampson Community College will be located on your right. Turn right at the stoplight in front of the campus. The first building you see (facing the highway) is the North Building.

Sampson Community College Small Business Center.
Revised: July 15, 2008